![](https://surfaceartinc.com/wp-content/uploads/2023/10/wss-logo-cmyk.png)
SHOWER ACCESSORIES
WALL BOARDS
Sold individually, 1/2" boards of all sizes also sold in packs of 5
![](https://surfaceartinc.com/wp-content/uploads/2023/11/wss-boards-2-300x300.jpg)
Available In: 48 x 60 1/2", 36x60 1/2" and 32 x 48 1/8", 1/4", 1/2", and 5/8"
SCREWS AND WASHERS
Pronged washers and sturdy screws for easy fastening and securing wall board to framing.
![](https://surfaceartinc.com/wp-content/uploads/2023/11/Untitled-design-16-300x300.png)
Available In: Packs of 100 and 1000 each
WATERTIGHT SEALANT
Used to cover all exposed edges, seams and screws/washers.
![](https://surfaceartinc.com/wp-content/uploads/2024/07/watertight-sealant-300x300.png)
Available In: 10.5-oz tubeS
SEALING COMPONENTS
Designed to keep corners and wall board seams watertight.
![](https://surfaceartinc.com/wp-content/uploads/2023/11/sealing-components-300x300.png)
Available In: Full kits of premade Inside and Outside corners, Mixing Valve Collar and Pipe Collar.
WATERTIGHT MEMBRANE
Used for additional protection against mildew and water damage, or to cover a steam shower wall.
![](https://surfaceartinc.com/wp-content/uploads/2023/11/wss-accessories-3-300x300.jpg)
Available In: 3.28' x 32.81' and 3.28' x 98.43'
WATERTIGHT TAPE
Designed to keep corners and wall board seams watertight.
![](https://surfaceartinc.com/wp-content/uploads/2023/11/wss-sealing-2-300x300.jpg)
Available In: 4.72" x 32.71' or 4.72" x 98.43' Rolls
PREMADE SHOWER NICHES
Pre-build with watertight wallboard.
![Shower Niche being installed](https://surfaceartinc.com/wp-content/uploads/2023/11/accessories-1top-5-300x300.jpg)
Available In: 12" x 14" , 12" x 20", 12" x 26"
all include a 2" movable shelf
PRE-MADE CURBS
Made from the same material as our wall board in standard and mini.
![](https://surfaceartinc.com/wp-content/uploads/2023/11/wss-accessories-2-300x300.jpg)
Available In: 3" Wide by 4.5" Tall - 30", 48" and 60" or 3" Wide x 2.25" Tall - 36", 48" and 63"
2" STRUCTURAL BOARD
Perfect for custom shower features that require additional strength like shower benches and pony walls
![](https://surfaceartinc.com/wp-content/uploads/2023/11/wss-boards-3-1-300x300.jpg)
Available In: 24" x 48" x 2"
4 INCH DRAIN
Designed to keep corners and wall board seams watertight.
![](https://surfaceartinc.com/wp-content/uploads/2023/11/wss-drains-square-all-300x300.jpg)
Available In Top to Bottom: Chrome, Gold, Brushed Nickle, Brushed Bronze and Matte Black
SAI THINSET MORTAR
Anti-slump formulas designed for use at 3/8" to 1/2" thickness to give support under large-format tile
![](https://surfaceartinc.com/wp-content/uploads/2023/11/Untitled-design-18-300x300.png)