INSTALLATION ACCESSORIES
Spin Doctor Tile Leveling System
Achieving a flush surface from one tile to another has never been easier: the Spin Doctor System uses a fast and precise free spin action and will accommodate most tile surfaces or thickness.
Space, level, and align - all in one simple system. Spin Doctor makes large format tile installation faster and easier; no more fatigue from the use of special tools, both hands, or awkward repetitive motions.
Features
- Loose spin cap reduces installation time and allows longer reach with less strain
- Open view cap design allows user to see the grout joint for accuracy
- Can be installed over tile, glass, and natural stone
- Leveling Caps and Anti-Friction Plates are reusable
- Threaded spacer posts can be repurposed as additional spacers once separated from the base
- Color-coded threaded spacer posts distinguish between two available thicknesses: 1/8” (black) and 1/16” (white)
- Leveling Caps comprised of a proprietary material that is resistant to adhesives for easy clean up
Spin Doctor System Components
Reusable Leveling Cap
Sold in boxes of 100
1/8″ Black Breakaway Threaded Spacer Post
Sold in boxes of 250
1/16″ White Breakaway Threaded Spacer Post
Sold in boxes of 250
Reusable Anti-Friction Protection Plate
Sold in boxes of 100
Using the Spin Doctor Tile Leveling System
STEP 1
- Insert the threaded spacer posts beneath each exposed edge of the tile, making sure there is direct contact between the spacer and the tile with no mortar in between.
- Position the spacer posts to best suit the tile size and layout.
- Install the adjacent tile tightly against the already inserted threaded spacer posts.
- Slide the tile back and forth or use a rubber mallet to bed the tile into the mortar while releasing air trapped inside. color
STEP 2
- Place the rotating cap on the top of the threaded spacer post and SPIN the cap down to the tile surface.
- Turn cap as needed until all adjacent surfaces are flush.
- Use optional Anti-friction Protection plate if desired
STEP 3
- After mortar is cured to the manufacturer’s specification, the caps, threaded spacer posts and optional Anti-Friction Shield can be removed by kicking the pieces or using a rubber mallet in the same direction of the joint.
- Caps can be reused
- Used threaded spacer posts can be repurposed as additional spacers